Name:         Power Macintosh G3 Ethernet (Built-In) driver
Version:      2.0.1
Released:     January 23, 1998
Requires:
Respective locales of Mac OS 8.0 and one of the following: Power
Macintosh G3 Desktop 233, Power Macintosh G3 Desktop 266, Power
Macintosh G3 Minitower 233, Power Macintosh G3 Minitower 266.
Note that this software is not needed for the PowerBook G3.
Description:
This driver is used by the Power Macintosh G3 built-in Ethernet
interface. When using the 2.0 driver, data corruption could occur
when utilizing the built-in Ethernet interface where the system
was connected to an Ethernet network with a significant traffic
load. In addition, when connected to an auto-sensing 10/100 Mb
Ethernet hub or switch, the Power Macintosh G3 Desktop and
Minitower computer may fail to attach to the network. The 2.0.1
driver fixes these two problems. Note that this software is not
needed for the PowerBook G3. For complete information, please see
the Read Me included with this software or point your web browser
to http://til.info.apple.com/techinfo.nsf/artnum/n26052. Note that
the Read Me is in English, and that this problem has been fixed
in Mac OS 8.1.
 
This software consists of a Disk Copy NDIF (New Disk Image
Format) compressed image, which requires Disk Copy 6.1 or later
to use. Download this software to your hard drive and then
double-click it to use it. Disk Copy is available in the
Utilities folder.

Disk Copy 6.1 (or later) or Disk Image Mounter 2.1 (or later)
from Apple are the recommended applications to access all disk
images released by Apple and are the only supported applications
to access NDIF disk images.