Name:         Button Disabler
Version:      1.2
Released:     May 21, 1997 (Reposted May 29, 1997)
Requires:
Performa or Power Macintosh 52xx, 53xx, 62xx, 63xx, 5400,
6400, 5500, or 6500 series computer and Mac OS 7.6.1 or
later.
Description:
This control panel allows you to disable the bezel buttons
on the front of certain computer models.

This software consists of a Disk Copy compressed image,
which requires Disk Copy 6.1 or later to use. Download this
software to your hard drive and then double-click it to use
it. Disk Copy is available in the Utilities folder.

From the Read Me included with this software:

What is the Button Disabler version 1.2?

This control panel allows you to disable the bezel buttons
on the front of certain computer models.  If you have a
Performa or Power Macintosh 52xx, 53xx, 62xx, 63xx, 5400,
6400, 5500, or 6500 series computer you may use this control
panel while running Mac OS 7.6.1 or later.

To install this Button Disabler version 1.2 follow these
steps:

1. Locate the System Folder on the computer's hard disk.
Don't open the System Folder.

2. Drag the file named "Button Disabler" to the System
Folder.

3. A message appears asking if you want the Button Disabler
control panel to be put into the Control Panel folder. Click
OK. If a second message appears stating that Button Disabler
already exists and asks you if you would like to replace it,
click OK.

4. Open the Special menu and choose Restart.


IMPORTANT

If the second message does appear, then you had an earlier
version of Button Disabler control panel installed on your
computer.  Make sure that you only install the version 1.2
of the Button Disabler on the supported computer models. 
Use the older version 1.1 of the Button Disabler on Quadra
or LC series computers or computers with a PowerPC upgrade
card.


How do I use the Button Disabler control panel?

Once installed on your computer, you can use the Button
Disabler control panel by following these steps:

1. Open the Apple menu, located at the upper-left corner of
your screen.

2. Select then Control Panels menu item

3. Open the Button Disabler control panel

4. Click on the check box to disable or enable the bezel
buttons on the front of your computer.

Note:  If you see the message "The control panel 'Button
Disabler' cannot be used with this computer" make sure you
have installed Mac OS version 7.6.1 or later.  Version 1.2
of the Button Disabler control panel will not open on
versions of the Mac OS before 7.6.1.  Also, version 1.2 of
the Button Disabler control panel does not support any
Quadra or LC series computers or computers with a PowerPC
upgrade card.


What is new with version 1.2 of this control panel?

Version 1.2 of the Button Disabler control panel adds
support for the 5400, 6400, 5500, and 6500 series computers.
Version 1.2 of the control panel does not support any
Quadra or LC series computers or computers with a PowerPC
upgrade card.  Continue to use the version 1.1 of the Button
Disabler with those Quadra and LC series computers.

April 16, 1997

(c) 1997  Apple Computer, Inc.  All rights reserved.
Apple, the Apple logo, Performa, Mac, and Power Macintosh
are trademarks of Apple Computer, Inc., registered in the
U.S. and other countries.  PowerPC is a registered trademark
of International Business Machines Corporation, used under
license therefrom.